Dnewcomb929
New Member
Ok, I hope I can get some ideas of how to get my new thermal to tighten up.
The QD mount on my Zues is loose on the rail when I lock the latches. The latches are adjusted so all the way
down so that it is tight even when not on the rail of the rifle. I don't know what is out of spec.
The rocking movement is just enough that you can hear it clicking going side to side, fore and aft isn't perceptible.
It will also slide fore and aft between the T-marks.
If it were on a bottom end upper I would point there just due to less confidence in QC, but it's on an LWRC six8 razorback...
I would attach photos, but I'm a tech idiot and don't know how lol
Thanks for any help/ guidance
The QD mount on my Zues is loose on the rail when I lock the latches. The latches are adjusted so all the way
down so that it is tight even when not on the rail of the rifle. I don't know what is out of spec.
The rocking movement is just enough that you can hear it clicking going side to side, fore and aft isn't perceptible.
It will also slide fore and aft between the T-marks.
If it were on a bottom end upper I would point there just due to less confidence in QC, but it's on an LWRC six8 razorback...
I would attach photos, but I'm a tech idiot and don't know how lol
Thanks for any help/ guidance