Thunder Chicken Stuck on cherry bomb MV

Discussion in 'SUPPRESSORS sponsored by SILENCER SHOP' started by kryptekman, Jul 16, 2019.

  1. kryptekman

    kryptekman LSB Member

    Joined:
    Oct 18, 2015
    Messages:
    71
    Did a stupid thing and didnt have the 556 Chery bomb totally secured on the host rifle and now the silencer has the cherry bomb attached inside. It works fine shooting but I cant put on any other rifle now unless 556

    Should I try to red lock tite the MV to barrel and give a day to cure then remove supressor? there is not much if any surface area to grab the cherry bomb and hold it while i spin the supressor
     
  2. Rookie

    Rookie LSB Member

    Joined:
    Sep 26, 2017
    Messages:
    246
    I'd try blue before the red.
     
  3. erForman

    erForman Greenwood, TX SUS VENATOR CLUB LoneStarBoars Supporter

    Joined:
    Sep 26, 2013
    Messages:
    154
    Did the same thing with my new Thunder Chicken. I used blue loctite and let it sit for 30 min. before unscrewing the silencer. Worked like a charm.
     
  4. Jhop

    Jhop LSB Active Member SUS VENATOR CLUB

    Joined:
    Aug 29, 2015
    Messages:
    711
    Location:
    Copperas Cove, Texas
    If the blue loctite doesn't work. Use the red loctite. With the red loctite you can use a heatgun to heat everything up then remove when hot.
     

Share This Page