Anybody using AA2200 with bullets lighter than 120gr?
AA2200
- Thread starter histopicker
- Start date
TEXASLAWMAN
Lone Star Boars Owner
LSB TURKEY BUZZARD PRESERVATION SOCIETY
SUS VENATOR CLUB
LoneStarBoars Supporter
For what caliber? I know lots if folks using it for the 6.8 with the 110's and 95ttsx.
duhh, some days I might as well not even think, sorry about that. For the 6.8, I have some old sierra 110 gr soft points, might as well burn em.
I am getting 3125fps with a 85gr Barnes TSX out of my 18" Bison/AR using H4198. Super accurate also.
When I found that AA2200 was nowhere to be found, I started working up loads with this as I had about 6lbs. Will stick with this. ---pruhdlr
Edit To Add: My S.D/E.S. numbers are very low with this powder also
When I found that AA2200 was nowhere to be found, I started working up loads with this as I had about 6lbs. Will stick with this. ---pruhdlr
Edit To Add: My S.D/E.S. numbers are very low with this powder also
Last edited:
Rememberd the sticky on 68 forum. sorry.
That's a smoking round.
TEXASLAWMAN
Lone Star Boars Owner
LSB TURKEY BUZZARD PRESERVATION SOCIETY
SUS VENATOR CLUB
LoneStarBoars Supporter
I can find some info when I get home!
I have used it with 110 grain sierra pro hunters, 110 hornady bthp, and 110 grain barnes tsx. My max load gauged by reading the primer and swipes was always right around 29 grains +/- .3 grains for each of the bullets listed. This was with CCI #450 primers, once or more fired SSA brass. All loaded to 2.295 OAL.
That's ok lawman. I found plenty of info after I posted this. Thanks though.
